H-beam is a more optimized cross-sectional area distribution, more reasonable than the economic section of high-efficiency profiles, because of its section and the English letter "H" the same name. Since all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structure in all directions, and has been widely used.

Stainless steel I-beams are made of 201(1Cr17Ni5Mn6N), 202(2 Cr13Mn9Ni4), 301(1 Cr17Ni7), 303(Y1Cr18Ni9), 304(OCr18Ni9), 304L (03 Cr19Ni10), 316(0 Cr17Ni12Mo2), 316L(00 Cr17Ni14Mo2), 321 (1 Cr18Ni9Ti), 420( 2cr13), 310S(0 Cr25Ni20), etc. The chemical composition of stainless steel I-beams belongs to general structural rolled steel series, the main test indexes were C, Mn, P and S. According to different grades, the content varies, the approximate range is C<0.08%, Mn: 2.0, P<0.035%, S<0.03%. Materials are widely used in hardware products, medical

Angle steel, commonly known as angle iron, is a long strip of steel with two sides perpendicular to each other. Angle steel can be composed of different force components according to the different needs of the structure, and can also be used as a connector between components. Widely used in various building structures and engineering structures, such as beams, bridges, transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks, cable trench supports, power piping, bus support installation, and warehouse shelves.

Channel steel is a long strip of steel with a groove-shaped section, which is a carbon structural steel for construction and machinery. It is a section steel with a complex section, and its section shape is groove-shaped. Channel steel is mainly used for building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide

H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

Material ：BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500,HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 KoreaStandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
Size：6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm
Length： 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard: BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671
Grade: Grade A, Grade B, Grade C
Section Shape ： Spiral Shape,Herringbone Shape,Crescent Shape
Technique: Steel Rebar Iron Rod
Packing :Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.

Material ：BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500,HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 KoreaStandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
Size：6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm
Length： 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard: BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671
Grade: Grade A, Grade B, Grade C
Section Shape ： Spiral Shape,Herringbone Shape,Crescent Shape
Technique: Steel Rebar Iron Rod
Packing :Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.

Material ：BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500,HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 KoreaStandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
Size：6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm
Length： 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard: BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671
Grade: Grade A, Grade B, Grade C
Section Shape ： Spiral Shape,Herringbone Shape,Crescent Shape
Technique: Steel Rebar Iron Rod
Packing :Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.

Product Name：Carbon steel wire rod
Diameter： 0.15-16.00mm
Material：SAE1006 1008 1010 1022 Carbon steel
MOQ：1 ton , We can accept sample order.
Product type：Plain round/Twisted

Export packing ：Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Standard：GB4357,DIN17223,JIS G 3521 , EN10270-1
Surface treatment：Custom Made,Black,Polishing,Mirror A/B,Lusterless,Acid Washing,Varnish Paint
Delivery time： 7-10 days after receive the deposit.
Technology: cold drawn, cold rolled, hot rolled.
Main application : making spring,mattress,wire rope, brush, cable
DIN :The customer request
Production :capital 150 TON/day 5000 TON /month

Product Name：Carbon steel wire rod
Diameter： 0.15-16.00mm
Material：SAE1006 1008 1010 1022 Carbon steel
MOQ：1 ton , We can accept sample order.
Product type：Plain round/Twisted

Export packing ：Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Standard：GB4357,DIN17223,JIS G 3521 , EN10270-1
Surface treatment：Custom Made,Black,Polishing,Mirror A/B,Lusterless,Acid Washing,Varnish Paint
Delivery time： 7-10 days after receive the deposit.
Technology: cold drawn, cold rolled, hot rolled.
Main application : making spring,mattress,wire rope, brush, cable
DIN :The customer request
Production :capital 150 TON/day 5000 TON /month

Product Name：Carbon steel wire rod
Diameter： 0.15-16.00mm
Material：SAE1006 1008 1010 1022 Carbon steel
MOQ：1 ton , We can accept sample order.
Product type：Plain round/Twisted

Export packing ：Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Standard：GB4357,DIN17223,JIS G 3521 , EN10270-1
Surface treatment：Custom Made,Black,Polishing,Mirror A/B,Lusterless,Acid Washing,Varnish Paint
Delivery time： 7-10 days after receive the deposit.
Technology: cold drawn, cold rolled, hot rolled.
Main application : making spring,mattress,wire rope, brush, cable
DIN :The customer request
Production :capital 150 TON/day 5000 TON /month